NSN 3413-00-517-1061 · NIIN 005171061 · FSC 3413
NO DASHES 3413005171061
In Stock
DRILLING MACHINE,UPRIGHT
Drilling and Tapping Machines
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCRH | SPINDLE QUANTITY | 1 |
| AQDD | FEED TYPE | POWER |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | MIL-D-3141 |
| FREQ | FREQUENCY IN HERTZ | 60.000 |
| FAAZ | PHASE | SINGLE/THREE |
| BTTB | SPINDLE SPEED RANGE IN RPM | 75.000 TO 1500.000 |
| ELEC | VOLTAGE IN VOLTS | 220.000 |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.000 |
| BPSX | HEAD VERTICAL ADJUSTMENT | INCHES NOMINAL 10.000 |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| AAXX | MOUNTING TYPE | FLOOR |
| ABYE | ELECTRIC MOTOR POWER RATING | HORSEPOWER 3.000 |
| ACDC | CURRENT TYPE | AC |
| AJGD | HEAD TYPE | SLIDING |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | CHUCK 1; DRIFTS,DRILL 3; SLEEVE,REDUCING 2 |
| BNSP | UPPER WORKING SURFACE SHAPE | ROUND |
| BNSR | UPPER WORKING SURFACE DIAMETER | INCHES NOMINAL 17.000 |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | INCHES NOMINAL 20.000 |
| BNSF | BASE WORKING SURFACE TYPE | SLOTTED W/COOLANT TROUGH |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRK | SPINDLE SOCKET TAPER SIZE | MORSE TAPER 4 |
| BNRL | SPINDLE TRAVEL DISTANCE | INCHES MINIMUM 6.875 |
| BNRW | BASE WORKING SURFACE LENGTH | INCHES NOMINAL 16.000 |
| BNRX | BASE WORKING SURFACE WIDTH | INCHES NOMINAL 16.000 |
| BNRZ | COLUMN TYPE | ROUND |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES NOMINAL 11.000 |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | SQUARE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILD3141 | 81349 |
| 3416-2111-4030 | 99998 |
| 3413-1321-2422 | 99998 |
| 22 | 09519 |