NSN 3413-01-369-3042 · NIIN 013693042 · FSC 3413
NO DASHES 3413013693042
In Stock
DRILLING MACHINE,UPRIGHT
Drilling and Tapping Machines
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| AJGD | HEAD TYPE | FIXED |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | BELT AND PULLEY GUARD 1,BELT AND MOTOR PULLEY (7/8 IN. BORE) 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,MOTOR 1 CONTROLS 1,TABLE RAISING MECHANISM 1,SAFETY COLLAR FOR HEAD 1 |
| AQDD | FEED TYPE | HAND |
| BCRH | SPINDLE QUANTITY | 1 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRK | SPINDLE SOCKET TAPER SIZE | MORSE 2 |
| BNRL | SPINDLE TRAVEL DISTANCE | INCHES NOMINAL 5.000 |
| BNRW | BASE WORKING SURFACE LENGTH | INCHES NOMINAL 16.250 |
| BNRX | BASE WORKING SURFACE WIDTH | INCHES NOMINAL 13.500 |
| BNRZ | COLUMN TYPE | ROUND |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES NOMINAL 10.250 |
| BNSF | BASE WORKING SURFACE TYPE | TEE SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSH | BASE WORKING SURFACE AREA | SQUARE INCHES 219.000 |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED W/CENTER HOLE |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSQ | UPPER WORKING SURFACE AREA | SQUARE INCHES 154.000 |
| BNSS | UPPER WORKING SURFACE LENGTH | INCHES NOMINAL 14.000 |
| BNST | UPPER WORKING SURFACE WIDTH | INCHES NOMINAL 11.000 |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | INCHES NOMINAL 34.750 |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | 5 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 700.0 TO 4250.0 |
| ELEC | VOLTAGE IN VOLTS | 115.0 OR 230.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | 24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND OVERLOAD PROTECTION (LVC). SLOTS AND SIDE LEDGES ON MODERN TABLE DESIGN MAKE CLAMPING OF WORK EASY.MACHINED FRONT APRON HAS MOUNTING HOLES. GROUND INDEX PIN ACCURATELY LOCATES TABLE AT THE LEVEL POSITION,AND AT 90 DEGREE LEFT TILT OR 90 DEGREE RIGHT TILT POSITIONS. STEEL GUARD ON DELTA 17 IN. STEP PULLEY DRILL PRESSES SWINGS UP HIGH AND BACK,WHILE THREE SPECIALLY DESIGNED SUPPORTS AND A STOP HOLD GUARD IN DESIRED "UP" POSITION. WITH ALL INTERFERENCE PRACTICALLY ELIMINATED,OPERATOR MAKES BELT AND SPEED CHANGES QUICKLY. BUILT-IN CLIPS AUTOMATICALLY LOCK GUARD IN PLACE WHEN CLOSED. |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 17-413 | 83738 |