NSN 3413-01-651-1748 · NIIN 016511748 · FSC 3413
NO DASHES 3413016511748
In Stock
DRILLING MACHINE,UPRIGHT
Drilling and Tapping Machines
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| APHE | OPERATION METHOD | MANUAL |
| BCRH | SPINDLE QUANTITY | 1 |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| ABYE | ELECTRIC MOTOR POWER RATING | HORSEPOWER 0.75 |
| ACDC | CURRENT TYPE | AC/DC |
| AJGD | HEAD TYPE | FIXED |
| AAXX | MOUNTING TYPE | FLOOR |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | 18" LASER DRILL PRESS |
| ELEC | VOLTAGE IN VOLTS | 120.0 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BTSZ | SPINDLE SPEED QUANTITY | 1 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 170.0 TO 3000.0 |
| AQDD | FEED TYPE | HAND |
| BNRZ | COLUMN TYPE | ROUND |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES NOMINAL 18.0 |
| FEAT | SPECIAL FEATURES | WOODWORKERS TABLE HAS TILT CAPABILITY OF 90 DEGREES TO THE LEFT OR TO THE RIGHT |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BNSS | UPPER WORKING SURFACE LENGTH | INCHES NOMINAL 20.0 |
| BNST | UPPER WORKING SURFACE WIDTH | INCHES NOMINAL 14.0 |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | INCHES MAXIMUM 48.0 |
| BNSF | BASE WORKING SURFACE TYPE | SLOTTED |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 90.0 |
| BNRK | SPINDLE SOCKET TAPER SIZE | MORSE 2 TO JACOBS3 |
| BNRL | SPINDLE TRAVEL DISTANCE | INCHES NOMINAL 6.0 |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED W/CENTER HOLE |
| FAAZ | PHASE | SINGLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 18-900L | 543P1 |