NSN 3415-01-354-2941 · NIIN 013542941 · FSC 3415
NO DASHES 3415013542941
In Stock
GRINDING MACHINE,CYLINDRICAL
Grinding Machines
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 39.375 |
| ANCY | HORSEPOWER RATING | 4.00 |
| APGF | DESIGN TYPE | UNIVERSAL |
| AWZJ | POWER SOURCE | ELECTRIC MOTOR |
| BMYX | MAXIMUM RATED SWING | INCHES 9.850 |
| BNBW | WHEEL MAXIMUM DIAMETER | INCHES 16.000 |
| BNBX | WHEEL HEAD ATTACHMENT DIAMETER AND TYPE | INCHES NOMINAL SPINDLE 5.000 |
| BNBY | HEAD STOCK SWIVEL ADJUSTMENT | 360 DEGREES |
| ELEC | VOLTAGE IN VOLTS | 460.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | WHEEL HEAD SWIVEL ADJUSTMENT 270 DEG ON AIR CUSHION W/POSITIVE INDEXED STOP FOR 30 OR 45 DEG;WHEEL 16.0 IN. BY 2.5 IN. BY 5.0 IN.;TILTING 3-JAW STEADY REST DIA 3;4-JAW CONCENTRIC AND INDEPENDENT CHUCK 8 IN. DIA;WHEEL HEAD SWIVELS 270 DEGREES;FIXED CENTER HEIGHT 125MM/4.921875 IN.;DRAW BAR FOR WORKHEAD;REDUCTION SLEEVE,MORSE 5/3 FOR WORKHEAD;SET OF 8 DRIVING DOGS W/STAND;SET OF WRENCHES;OIL GUNS;WORKHEAD MOTOR 3 HP;HYDRAULIC MOTOR 1 HP;COOLANT PUMP MOTOR 0.15 HP;TOTAL POWER 7KW;COOLANT TANK 48 GAL. |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1000-U-125 | 0ST53 |