NSN 3416-01-034-1257 · NIIN 010341257 · FSC 3416
NO DASHES 3416010341257
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | BENCH OR FLOOR |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 30.000 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 STOP,CARRIAGE,MICROMETER,1 STOP,THREAD CUTTING,1 INDICATOR,THREAD,1 TAPER ATTACHMENT,1 SET GEARS,1BAG,1 COVER,CANVAS,1 SET WRENCHES,1 WRENCH SPANNER,1 WRENCH,TOOL POST,1 ADAPTER HEADSTOCK,1 ADAPTER,TAILSTOCK,1 CHUCK,3-JAW UNIVERSAL,1 CHUCK4 JAW INDEPENDENT,1 CHUCK,COLLET,1 SET COLLETS,1 CHUCK DRILL,1 FACEPLATE,12 INCH DIAMETER,1 FACEPLATE,24 INCH DIAMETER,2 LATHE CENTERS,1 SET DOG LATHE,1 DOG LATHE,1 STEADYREST,3 SOCKETS,TAPER SHANK TOOL,1 SET DRIFT,DRILL,1 SET TOOL POST,LATHE,1 KNURLING TOOL,2 HOLDERS,3/8 INCH SQUARECUTTER BIT RIGHT AND LEFT HAND TURNING,2 HOLDERS,1/8 X 7/8 INCH CUT-OFF BLADE,RIGHT AND LEFT HAND OFFSET,1 HOLDER,BORING BAR,1 BORING BAR,ROUND,1/2 INCH DIAMETER,1 BORING BAR ROUND,3/4 INCH DIAMETER,1 BORING BAR,ROUND,1-1/8 INCH DIAMETER,3 KNURLING SETS |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.000 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 30.0 TO 1200.0 |
| BTTD | RATED SWING | INCHES NOMINAL 25.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 25.000 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 18.000 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES MINIMUM 3.000 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 50.0 AND 60.0 |