NSN 3416-00-242-2770 · NIIN 002422770 · FSC 3416
NO DASHES 3416002422770
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 58.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 3.0 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 25.0 TO 1000.0 |
| BTWB | THREAD CHANGE QUANTITY | 55 |
| BTWC | RATED SWING THROUGH OPEN GAP | INCHES NOMINAL 28.000 |
| BTWF | RATED SWING OVER CLOSED GAP | INCHES NOMINAL 14.000 |
| BTWJ | DISTANCE BETWEEN OPEN CENTERS | INCHES NOMINAL 58.000 |
| BTWK | DISTANCE BETWEEN CLOSED CENTERS | INCHES NOMINAL 38.000 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.062 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 62 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 80.0 |
| ELEC | VOLTAGE IN VOLTS | 115.0 AND 230.0 |
| FAAZ | PHASE | SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SIZE 1 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AKYD |