NSN 3416-00-542-1100 · NIIN 005421100 · FSC 3416
NO DASHES 3416005421100
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BTWD | ACTUAL SWING THROUGH OPEN GAP | INCHES NOMINAL 49.500 |
| BTWC | RATED SWING THROUGH OPEN GAP | INCHES NOMINAL 49.000 |
| BTWB | THREAD CHANGE QUANTITY | 60 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 11.0 TO 666.0 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 16.000 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BTWJ,BTWK,ASHK |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 60 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 1.0 TO 72.0 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| FAAZ | PHASE | THREE |
| BTWF | RATED SWING OVER CLOSED GAP | INCHES NOMINAL 25.000 |
| BTWG | ACTUAL SWING OVER CLOSED GAP | INCHES NOMINAL 26.375 |
| BTWJ | DISTANCE BETWEEN OPEN CENTERS | INCHES NOMINAL 84.000 |
| BTWK | DISTANCE BETWEEN CLOSED CENTERS | INCHES NOMINAL 48.000 |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 20.000 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 18 |
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| AGLD | PERFORMANCE TYPE | HEAVY DUTY |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND SIZE B |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.688 |
| BTYQ | CARRIAGE QUANTITY | 1 |