NSN 3416-00-235-0520 · NIIN 002350520 · FSC 3416
NO DASHES 3416002350520
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | BENCH |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 36.000 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 0.750 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 34.0 TO 690.0 |
| BTTD | RATED SWING | INCHES NOMINAL 10.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 11.125 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 8.000 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.375 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 4.0 TO 224.0 |
| ELEC | VOLTAGE IN VOLTS | 110.0 |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BTZR,ADQR,BTSZ,BTTB,ASHK |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S56 | 54522 |
| A-A-59334TYISTBSW10SZ30 | 58536 |