NSN 3416-00-242-2732 · NIIN 002422732 · FSC 3416
NO DASHES 3416002422732
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | BENCH |
| ACDC | CURRENT TYPE | AC/DC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 24.000 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 0.50 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 14.0 TO 560.0 |
| BTTD | RATED SWING | INCHES NOMINAL 10.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 10.500 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 4.500 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 0.781 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND OR POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | POWER OR HAND |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 4.0 TO 224.0 |
| ELEC | VOLTAGE IN VOLTS | 115.0 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | FREQ,FAAZ |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A-A-59334TYISTBSW10SZ20 | 58536 |
| 825 | 94389 |
Supersedes
This item replaces cancelled NIIN 002350522. An older drawing citing one of those numbers resolves here.