NSN 3416-00-473-6360 · NIIN 004736360 · FSC 3416
NO DASHES 3416004736360
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES MINIMUM 1.375 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 16.250 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 9.625 |
| BTTD | RATED SWING | INCHES NOMINAL 16.250 |
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 30.0 TO 980.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | ADDITIONAL EQUIPMENT PER MIL-STD 931 |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 2.000 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BTSZ,BTTB,AND ASHK |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 4.0 TO 224.0 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| FAAZ | PHASE | THREE |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 57.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CL117E | 55985 |
| 3416-2111-6057 | 99998 |