NSN 3416-00-725-3508 · NIIN 007253508 · FSC 3416
NO DASHES 3416007253508
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BTWB | THREAD CHANGE QUANTITY | 48 |
| AAXX | MOUNTING TYPE | FLOOR |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTWC | RATED SWING THROUGH OPEN GAP | INCHES NOMINAL 36.000 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.750 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 25.0 TO 1000.0 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 12.000 |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTWK | DISTANCE BETWEEN CLOSED CENTERS | INCHES NOMINAL 30.000 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| FAAZ | PHASE | THREE |
| BTWD | ACTUAL SWING THROUGH OPEN GAP | INCHES NOMINAL 36.000 |
| BTWF | RATED SWING OVER CLOSED GAP | INCHES NOMINAL 19.000 |
| BTWG | ACTUAL SWING OVER CLOSED GAP | INCHES NOMINAL 19.000 |
| BTWJ | DISTANCE BETWEEN OPEN CENTERS | INCHES NOMINAL 50.000 |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 7.500 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
| APGF | DESIGN TYPE | SCREW |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| ACDC | CURRENT TYPE | AC |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE I AND SIZE 1912 TO 36 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AKYD |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 80.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILL13896 | 81349 |
| 3416-2413-6050 | 99998 |