NSN 3416-00-758-2394 · NIIN 007582394 · FSC 3416
NO DASHES 3416007582394
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| BTWK | DISTANCE BETWEEN CLOSED CENTERS | INCHES NOMINAL 48.000 |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 7.5 |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 80.0 |
| ELEC | VOLTAGE IN VOLTS | 208.0 |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ACDC | CURRENT TYPE | AC |
| AAXX | MOUNTING TYPE | FLOOR |
| BTWF | RATED SWING OVER CLOSED GAP | INCHES NOMINAL 26.000 |
| BTWG | ACTUAL SWING OVER CLOSED GAP | INCHES NOMINAL 36.000 |
| BTWJ | DISTANCE BETWEEN OPEN CENTERS | INCHES NOMINAL 84.000 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HEADSTOCK CENTER TAPER SIZE DESIGNATOR,SPINDLE SPEED RANGE IN RPM,VOLTAGE IN VOLTS,AND ADDITIONAL EQUIPMENT PER MIL-STD 931 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY DISTANCE BETWEEN OPEN CENTERS,DIST BETWEEN CLOSED CENTERS,ELEC MOTOR QUAN,ELEC MOTOR HP RATING,CURRENT TYPE,VOLTAGE IN VOLTS,FREQ IN HERTZ,AND PHASE |
| BTWC | RATED SWING THROUGH OPEN GAP | INCHES NOMINAL 52.000 |
| BTWD | ACTUAL SWING THROUGH OPEN GAP | INCHES NOMINAL 36.000 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 2.188 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND SIZE 2418 TO 52 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 18.000 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 18.0 TO 720.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CHUCK,3 JAW,10IN.;1 CHUCK,4 JAW,18IN.;COLLET CHUCK AND COLLETS;SIZES 1/16IN. THRU 1 3/8IN.;DRILL CHUCK,1/16IN. TO 1/2IN.;1 FACEPLATE 23 1/2IN.; 1FACEPLATE,GAP,38IN.;1 FACEPLATE JAW FOL 23 1/2IN. FACEPLATE;1 FACEPLATE JAW FOR 38IN. FACEPLATE;1 FOLLOW REST 1/2IN.;1 INDEXING SQUARE TOOL TURRET;1 RESELECT SPEED CHANGE;1 STEADY REST/STD/ 3/4IN. BY 7IN.;1 STEADY REST/OVERSIZE/7IN. BY 12IN.;1 TAPER ATTACHMENT 0 - 3 1/2IN.,1;TOOLS FURNISHED IN ACCORDANCE WITH MFR STD PRACTICE |
| APGF | DESIGN TYPE | SCREW |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REGAL24-39 | 35377 |
| 24-39REGAL | 35377 |
| MILL13896 | 81349 |
| 3416-2415-2084 | 99998 |