NSN 3416-01-231-1788 · NIIN 012311788 · FSC 3416
NO DASHES 3416012311788
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 60.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 FULL LENGTH REAR SPLASH GUARD; 1 10.0 IN. DIA. DOGPLATES; 1 NO. 2 STANDARD TOOLPOST; 2 NO. 4 MORSE TAPER DEAD CENTERS; 1 NO. 4 MORSE TAPER SPINDLE SLEEVE; 1 OPERATORS HANDBOOK; 1 INSPECTION REPORT; STANDARD 115 VOLT ELECTRIC CONTROLS AND CONTROL PANEL; WRENCHES,KEYS,SPARE PINS |
| APGF | DESIGN TYPE | SCREW |
| BTSZ | SPINDLE SPEED QUANTITY | 18 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 40.0 TO 2000.0 |
| BTTD | RATED SWING | INCHES NOMINAL 16.000 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 10.000 |
| BTWB | THREAD CHANGE QUANTITY | 93 |
| BTWG | ACTUAL SWING OVER CLOSED GAP | INCHES NOMINAL 16.000 |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 93 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 72.0 |
| FEAT | SPECIAL FEATURES | D1-6 IN. CAMLOCK 3 BEARING SPINDLE; SWITCHABLE IN-METRIC FEED BOX; LEAD SCREW REVERSE-STANDARD; METRIC THREADING WITHOUT SPINDLE REVERSE |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RL 1660 G TW | 30870 |
| 1660 | 3AA35 |
| 1560 | 3AA35 |
| MIL-L-23249 | 81349 |
| 1660 | 98247 |
| 3416-2111-6060 | 99998 |
| 1660 | 0B6Z5 |
| JHTB-96-98-1003 | 13873 |