NSN 3416-01-454-8089 · NIIN 014548089 · FSC 3416
NO DASHES 3416014548089
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES MINIMUM 20.000 AND INCHES MAXIMUM 60.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.000 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 50.0 TO 1800.0 |
| BTTD | RATED SWING | INCHES NOMINAL 13.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 13.000 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 7.000 |
| BTWB | THREAD CHANGE QUANTITY | 35 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD OR STEP CONE PULLEY |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.562 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 56.0 |
| ELEC | VOLTAGE IN VOLTS | 230.0 AND 460.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | OPT CTR-CTR 40,50,60;OPT SPD 50-220;OPT HP5;NSN ASSIGNED TO BE GENERIC MSTR FOR 3416-00-186-4060 AND 3416-01-453-6661 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A-A-59334TYIISTBSW13 | 58536 |
| MIL-L-23249TYIISZ1307 | 81349 |