NSN 3416-01-479-0583 · NIIN 014790583 · FSC 3416
NO DASHES 3416014790583
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 60.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | HEADSTOCK W/FOUR SPEED RANGES (18-180RPMS, LOW RANGE), AND (180-1800RPMS, HIGH RANGE), (1EA);LED INDICATOR (1EA);0.125HP COOLANT, 115VAC (1EA) |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 10.000 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 4 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 18.0 TO 1800.0 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 11.000 |
| BTWB | THREAD CHANGE QUANTITY | 38 OR 40 |
| BTWC | RATED SWING THROUGH OPEN GAP | INCHES NOMINAL 28.000 |
| BTWD | ACTUAL SWING THROUGH OPEN GAP | INCHES NOMINAL 28.000 |
| BTWF | RATED SWING OVER CLOSED GAP | INCHES NOMINAL 20.000 |
| BTWG | ACTUAL SWING OVER CLOSED GAP | INCHES NOMINAL 18.000 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 3.062 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 72.0 |
| ELEC | VOLTAGE IN VOLTS | 230.0 |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 18-60EVS | 55985 |
| TURN-NADO 18X60 EVS | 55985 |