NSN 3417-00-903-3770 · NIIN 009033770 · FSC 3417
NO DASHES 3417009033770
In Stock
MILLING MACHINE,HORIZONTAL,UNIVE
Milling Machines
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMPS | CURRENT RATING IN AMPS | 15.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| NMBR | QUANTITY | 2 |
| AAXX | MOUNTING TYPE | FLOOR |
| ABGL | WIDTH | INCHES NOMINAL 12.000 |
| ABRY | LENGTH | INCHES NOMINAL 56.500 |
| BNBD | TABLE LONGITUDINAL TRAVEL | INCHES NOMINAL 28.000 |
| BNBF | TABLE CROSS TRAVEL | INCHES NOMINAL 10.000 |
| BTZC | TABLE VERTICAL TRAVEL | INCHES NOMINAL 18.000 |
| AQDD | FEED TYPE | POWER |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.000 |
| AWZJ | POWER SOURCE | ELECTRIC MOTOR |
| BTZD | TABLE SWIVEL DIRECTION AND ADJUSTMENT IN DEG | EACH SIDE 46.0 |
| BTZG | SPINDLE CROSS ADJUSTMENT | INCHES NOMINAL 27.000 |
| FEAT | SPECIAL FEATURES | 3 HP INDEPENDENT OVERHEAD SPINDLELEVER SHIFT 3IN. ADJUSTING SPINDLE WITH NO.9 BROWN AND SHARP TAPER NOSE AND 8 SPEEDS;90 DEG SWIVEL HOUSING FOR I.O.S.;SHORT AND LONG LEAD ATTACHMENTS;SHORT AND LONG LEAD DRIVING MECHANISMS;16IN. CIRCULAR MILLING TABLE;INDEXING FOR CIRCULAR MILLING TABLE;POWER FEED FOR CIRCULAR MILLING TABLE;SLOTTING ATTACHMENT |
| AKYN | FURNISHED ITEMS AND QUANTITY | 11 ARBORS,1 EA,STYLE1 7/8 BY 10IN.,STYLE A 1 BY 18IN.,STYLE B 7/8 BY 31/2IN.,STYLE B 1 BY 3 1/2IN.,STYLE B 1BY 18IN.,STYLE B 1 1/4 BY 18IN.,STYLE C 1/2 BY 5/8IN.,STYLE C 3/4 BY 5/8IN.,STYLE C 1 BY 7/8IN.,STYLE C 1 1/4 BY 7/8IN.,STYLE C 1 1/2 BY 7/8IN.;1 CARTRIDGE NO. 50 N.S. TAPER;1 EA COLLET,C SERTES 1/2IN.,9/16IN.,5/8IN.,11/16IN.,3/4IN.;2 CHUCKS,1 EA,NO.50 N.S. TAPER SPRING,6IN. 6JAW UNIVERSAL;2 HOLDERS COLLET NO.50 TAPER TO NO.2 MORSE TAPER,NO.50 TAPER TO NO.5 BROWN AND SHARP; 5SLEEVES,1 EA,REDUCING NO.50 TAPER TO NO.3 MORSE,REDUCING NO.50 TAPER TO NO.4MORSE,REDUCING NO.50 TAPER TO NO.5 MORSE,REDUCING NO.50 TAPER TO NO.7 B.AND S.,REDUCING NO.50 TAPER TO NO.9 B.AND S.,1 VISE,NO.5 SWIVEL,1 VISE,UNIVERSALTOOLMAKERS |
| ACDC | CURRENT TYPE | AC |
| BTZJ | MAXIMUM DISTANCE FROM SPINDLE CENTER TO TABLE TOP | INCHES 18.000 |
| ELEC | VOLTAGE IN VOLTS | 220.0 |
| FAAZ | PHASE | THREE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILM80044TYIISZ2CL2 | 81349 |
| MILM80044TYIISZ2 | 81349 |
| 3417-2122-2834 | 99998 |
| 188011 | 12356 |