NSN 3417-01-387-1118 · NIIN 013871118 · FSC 3417
NO DASHES 3417013871118
In Stock
MILLING MACHINE,VERTICAL
Milling Machines
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | BENCH OR FLOOR |
| ABGL | WIDTH | INCHES NOMINAL 99.750 |
| ABMZ | DIAMETER | INCHES NOMINAL 4.500 |
| ABRY | LENGTH | INCHES NOMINAL 42.500 |
| ACDC | CURRENT TYPE | AC |
| AJGD | HEAD TYPE | ADJUSTABLE VERTICAL OR OSCILLATING |
| AKYN | FURNISHED ITEMS AND QUANTITY | MOTOR WITH CONTROLS, 1; POWER DOWNFEED, 1; 8 IN. EXTENDED COLUMN, 1; WORKLAMP, 1; ADJUSTABLE CARBIDE FACEMILL, 1; DRILL PRESS VISE, 1; 1/2 IN. DRILL CHUCK, 1; CHUYCK ARBOR, 1; OPERATOR'S MANUAL, 1 |
| AMPS | CURRENT RATING IN AMPS | 12.0 |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 2.000 |
| AWZJ | POWER SOURCE | ELECTRIC MOTOR |
| BNBB | TABLE TYPE | PLAIN |
| BNBD | TABLE LONGITUDINAL TRAVEL | INCHES NOMINAL 24.000 |
| BNBF | TABLE CROSS TRAVEL | INCHES NOMINAL 7.000 |
| BQLR | SPINDLE TYPE | VERTICAL POWER ADJUSTMENT OR VERTICAL SLIDING |
| BTZF | SPINDLE ADJUSTMENT | INCHES NOMINAL 26.000 |
| BTZK | MAXIMUM DISTANCE FROM SPINDLE NOSE TO WORKING SURFACE | INCHES 26.000 |
| ELEC | VOLTAGE IN VOLTS | 230.0 |
| FAAZ | PHASE | SINGLE |
| FEAT | SPECIAL FEATURES | 1 1/4 IN. DRILLING CAPACITY; 3 IN. FACEMILL CAPACITY; 3/4 IN. END MILL CAPACITY; 15 7/8 IN. SWING; R-8 SPINDLE TAPER; 5 IN. SPINDLE TRAVEL; 3 IN. QUILL DIAMETER; 360 DEGREE HEAD SWIVEL; 4 1/2 IN. COLUMN DIAMETER; 6 POWER DOWNFEEDS; 12 SPINDLE SPEEDS; RANGE OF SPINDLE SPEEDS 120-2500 RPM; WORKING SURFACE OF TABLE 8 1/2 IN. BY 31 3/4 IN.; 4 T-SLOTS; 5/8 IN. T-SLOT SIZE; BASE DIMENSIONS 15 3/4 IN. BY 29 3/4 IN.; 51 1/2 IN. HIGH; NET WEIGHT 700 LBS.; SHIPPING WEIGHT 800 LBS. |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| NMBR | QUANTITY | 1 |