NSN 3040-01-486-4314 · NIIN 014864314 · FSC 3040
NO DASHES 3040014864314
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: LOS ANGELES CLASS SSN (688)
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 8.1000 |
| AGAV | END ITEM IDENTIFICATION | LOS ANGELES CLASS SSN (688) |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 0.9980 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 3.0000 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.8340 AND INCHES MAXIMUM 0.8390 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 0.9980 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 2.2500 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.8340 AND INCHES MAXIMUM 0.8390 |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | INCHES NOMINAL 1.5000 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 2.2600 |
| ATPC | STEP QUANTITY | 3 |
| BDSQ | FIRST END SPLINE QUANTITY | 10 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 2.2500 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT, HULL VALVE GAGGING |
| FEAT | SPECIAL FEATURES | SECOND END HAS 0.300 INCH COUNTERBORE 0.291 INCH MIN., 0.321 INCH MAX DEEP 0.940 INCH FROM END. SHAFT HAS A 45 DEGREE BEVEL STARTING 2.620 INCH FROM SECOND END TAPERING TO FIRST END DIA. BEVEL HAS 0.125 INCH DIA. HOLE DRILLED 0.500 INCH DOWN FROM START OF BEVEL THRU TO SECOND END COUNTERBORE. |
| MATT | MATERIAL | COPPER ALLOY 632 |