NSN 3020-00-814-8710 · NIIN 008148710 · FSC 3020
NO DASHES 3020008148710
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES MINIMUM 2.9990 AND INCHES MAXIMUM 3.0000 |
| AJLA | TEETH QUANTITY | 72 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.082 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 75.0 AND ROCKWELL C MAXIMUM 83.0 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.2525 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 OR STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7720,CO- 303S OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-7720,CO- 303SE |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE |