NSN 5305-00-059-8247 · NIIN 000598247 · FSC 5305
NO DASHES 5305000598247
In Stock
SCREW,MACHINE
Screws
Application: W/S:TARAWA CLASS LHA; OLIVER PERRY CLASS FFG; NIMITZ CLASS CVN; TICONDEROGA CLASS CG (47); LPD-17 CLASS AMPHIBIOUS TRANSPORT DOCK; WASP CLASS LHD; SPRUANCE CLASS DD (963); FORRESTAL CLASS CV; KIDD CLASS DDG; LANDING CRAFT, UTILITY, 115 FT
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | W/S:TARAWA CLASS LHA; OLIVER PERRY CLASS FFG; NIMITZ CLASS CVN; TICONDEROGA CLASS CG (47); LPD-17 CLASS AMPHIBIOUS TRANSPORT DOCK; WASP CLASS LHD; SPRUANCE CLASS DD (963); FORRESTAL CLASS CV; KIDD CLASS DDG; LANDING CRAFT, UTILITY, 115 FT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 57000 |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.188 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.188 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.256 AND INCHES MAXIMUM 0.270 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.087 AND INCHES MAXIMUM 0.097 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-W-321 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Supersedes
This item replaces cancelled NIINs 000120781 · 000693448 · 000865900 · 001414353 · 001510631 · 002903011 · 002759149 · 002977660 · 005310135. An older drawing citing one of those numbers resolves here.