NSN 5305-00-470-5475 · NIIN 004705475 · FSC 5305
NO DASHES 5305004705475
In Stock
SCREW,MACHINE
Screws
Application: A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.407 AND INCHES MAXIMUM 0.500 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.500 |
| AASK | HEAD STYLE | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 9C |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING OR STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-763,300 SERIES OR FED STD 1ST MATERIAL RESPONSE 66,300 SERIES OR ASSN STD 2ND MATERIAL RESPONSE CO- 16-18 OR 18-8 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGAV | END ITEM IDENTIFICATION | A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.133 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.373 |
Supersedes
This item replaces cancelled NIIN 000884250. An older drawing citing one of those numbers resolves here.