NSN 3455-01-394-4009 · NIIN 013944009 · FSC 3455
NO DASHES 3455013944009
In Stock
REAMER,MACHINE
Cutting Tools for Machine Tools
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.250 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 4.6000 |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 1.374 |
| ABMZ | DIAMETER | INCHES NOMINAL 1.6550 |
| ALAR | FLUTE QUANTITY | 2 |
| AQPP | SHANK TYPE | STRAIGHT |
| AQWG | FLUTE DESIGN | STRAIGHT |
| AQWJ | FLUTE CUT DIRECTION | RIGHT-HAND |
| AQWL | PILOT TYPE | FIXED |
| CBBL | FEATURES PROVIDED | INSERTED FLUTE |
| FEAT | SPECIAL FEATURES | MATERIAL TO BE MACHINED IS TITANIUM; TOOL TO BE USED WITH RIGHT ANGLE QUACKENBUSH POWER UNIT; 10 1/4 IN. LENGTH; CLAMP TYPE CARBIDE INSERTS ARE 3/8 IN. INNER CIRCLE DIAMETER BY 1/8 IN. THICK; TOOL FUNCTION: USED TO REPAIR 68A110002 WING TO FUSELAGE ATTACH LUGS, WITH PROVISIONS TO BORE AND REAM FINISHED SIZE HOLES IN WING SPAR LUGS AND LUG BUSHINGS AFTER INSTALLATION; ROUGHING BORE TYPE |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED STEEL |
| MATT | MATERIAL | CUTTING EDGE TIP CARBIDE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RE168110002-S-U | 76301 |