NSN 5990-00-991-4484 · NIIN 009914484 · FSC 5990
NO DASHES 5990009914484
In Stock
SYNCHRO,DIFFERENTIAL RECEIVER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8350 AND INCHES MAXIMUM 0.8450 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MINIMUM 0.073 AND WATTS MAXIMUM 0.210 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.2620 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 8.500 AND INPUT TO OUTPUT MAXIMUM 9.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 0.030 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0008 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0330 AND INCHES MAXIMUM 0.0430 |
| AJSL | BODY SIZE | 9 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | SIDE |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJSP | STATOR INPUT CURRENT RATING | AMPERES MINIMUM 0.030 AND AMPERES MAXIMUM 0.087 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 10.00 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 125.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 30.00 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR MINIMUM 1.128 AND ROTOR TO STATOR MAXIMUM 1.154 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 12 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0330 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.7000 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 36.00 AND MAXIMUM 98.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 24.00 AND MAXIMUM 64.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |