NSN 5935-00-485-5117 · NIIN 004855117 · FSC 5935
NO DASHES 5935004855117
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.055 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACE |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.335 AND INCHES MAXIMUM 1.380 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.242 AND INCHES MAXIMUM 1.258 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.242 AND INCHES MAXIMUM 1.258 |
| ADZC | ENVIRONMENTAL PROTECTION | PRESSURE PROOF AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.126 |
| CSWM | SHELL SURFACE TREATMENT | CHROMIUM |
| CXCG | INCLUDED CONTACT QUANTITY | 55 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TY 1,CLASS 2 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.000 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-81511 TO 1 |
| THSD | THREAD SERIES DESIGNATOR | UN |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.964 AND INCHES MAXIMUM 0.974 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.964 AND INCHES MAXIMUM 0.974 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.765 AND INCHES MAXIMUM 0.775 |
| AFQR | THREADED DEVICE TYPE | BACK SHELL |
| AFQW | MATING END QUANTITY | 1 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-81511 |