NSN 6105-00-557-7433 · NIIN 005577433 · FSC 6105
NO DASHES 6105005577433
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A24 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| AAJT | OVERALL HEIGHT | INCHES 1.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 0.781 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.0900 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 20000.0 AND SINGLE FULL LOAD 17000.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.400 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 24.0 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 0.2 AND INCH-OUNCES STALLED 1.1 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 1 |
| CBBL | FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| BFMF | COOLING METHOD | NONVENTILATED |
| AAJU | OVERALL LENGTH | INCHES 1.687 |
| AAJV | OVERALL WIDTH | INCHES 0.750 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.200 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 3.0 AND MINUTES MINIMUM OFF 1.0 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 0.281 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |