NSN 5962-00-521-2154 · NIIN 005212154 · FSC 5962
NO DASHES 5962005212154
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWSG | TERMINAL SURFACE TREATMENT | GOLD |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 200.0 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.395 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 6.0 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 25.00 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACE |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 3 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | MULTIPLEXER, ANALOG 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 24 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.275 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13499-351-7716 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.080 |
Supersedes
This item replaces cancelled NIIN 006144521. An older drawing citing one of those numbers resolves here.