NSN 5307-00-145-2980 · NIIN 001452980 · FSC 5307
NO DASHES 5307001452980
In Stock
STUD,PLAIN
Studs
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.2250 TO 0.2274 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.687 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.625 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.625 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES NOMINAL 0.109 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.076 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.250 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.250 |
| MATT | MATERIAL | STEEL COMP 8735 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6320 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL COARSE (UNC) |
Supersedes
This item replaces cancelled NIIN 002076089. An older drawing citing one of those numbers resolves here.