NSN 5990-00-929-8921 · NIIN 009298921 · FSC 5990
NO DASHES 5990009298921
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 62.00 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6250 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AAQL | BODY STYLE | |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 328.00 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6900 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 65.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 157.00 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1780.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3550 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 40.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 70.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 425.00 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 553.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 325.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -20.0 TO 20.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |