NSN 6105-01-122-3835 · NIIN 011223835 · FSC 6105
NO DASHES 6105011223835
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.875 |
| AAJU | OVERALL LENGTH | INCHES 10.406 |
| AAJV | OVERALL WIDTH | INCHES 8.250 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.1250 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.125 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5000 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.1250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE AND FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 15.0 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CBME | CUBIC MEASURE | CUBIC FEET 2.000 |
| CNMM | FRAME SIZE DESIGNATION | 56-CZ |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 2.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.250 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.000 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3450.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.876 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.200 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |