NSN 3020-00-706-5440 · NIIN 007065440 · FSC 3020
NO DASHES 3020007065440
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | SECOND GEAR ALUMINUM ALLOY 2024 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.437 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| MATT | MATERIAL | FIRST GEAR ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | HUB STEEL COMP 303 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| STYL | STYLE DESIGNATOR | |
| TMQY | FURNISHED ITEMS AND QUANTITY | SETSCREW 1 |
| ANTP | BORE STYLE | |
| SFTT | SURFACE TREATMENT | FIRST GEAR ANODIZE |
| SFTT | SURFACE TREATMENT | HUB PASSIVATE |
| SFTT | SURFACE TREATMENT | SECOND GEAR ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HUB FED SPEC SINGLE TREATMENT RESPONSE QQ--35,TYE 2 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.4053 AND INCHES MAXIMUM 1.4063 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.104 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HUB FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SECOND GEAR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | TEETH FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| AJLA | TEETH QUANTITY | 90 |
| MATT | MATERIAL | TEETH ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FIRST GEAR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |