NSN 5905-00-834-2206 · NIIN 008342206 · FSC 5905
NO DASHES 5905008342206
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.15 TO 0.15 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 2.8740 AND INCHES MAXIMUM 2.8750 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 4 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 358.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.30 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.033 AND INCHES MAXIMUM 1.049 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 3.000 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.30 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 5.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -25.0 TO 25.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 500.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.104 AND INCHES MAXIMUM 2.226 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 2.874 AND INCHES MAXIMUM 2.875 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEDX | SHAFT STYLE |