NSN 3020-00-317-9796 · NIIN 003179796 · FSC 3020
NO DASHES 3020003179796
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.1560 |
| CWNH | TOOTH FORM | STANDARD |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.750 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.3125 |
| ABSA | SPLINE QUANTITY | 10 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 8.8850 |
| AAQL | BODY STYLE | |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 9.260 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.7810 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.312 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.4190 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.437 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.299 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.1850 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| ANTP | BORE STYLE | |
| AJLA | TEETH QUANTITY | 45 |
Supersedes
This item replaces cancelled NIIN 003489373. An older drawing citing one of those numbers resolves here.