NSN 6105-01-255-2010 · NIIN 012552010 · FSC 6105
NO DASHES 6105012552010
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRR | KEYWAY WIDTH | SECOND END INCHES NOMINAL 0.375 |
| ABRR | KEYWAY WIDTH | FIRST END INCHES NOMINAL 0.875 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES MINIMUM 3.119 AND INCHES MAXIMUM 3.134 |
| AFYS | KEYWAY LENGTH | FIRST END INCHES MINIMUM 10.860 AND INCHES MAXIMUM 10.900 |
| AFYS | KEYWAY LENGTH | SECOND END INCHES MINIMUM 1.360 AND INCHES MAXIMUM 1.400 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXCP | WINDING TYPE | SHUNT WOUND |
| CNMM | FRAME SIZE DESIGNATION | CY875 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 350.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1800.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 240.0 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END SINGLE STYLE A9 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END FIRST STYLE A2 AND SECOND STYLE A9 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION |