NSN 5315-01-299-6738 · NIIN 012996738 · FSC 5315
NO DASHES 5315012996738
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.156 |
| AATR | SHANK LENGTH | INCHES NOMINAL 1.156 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 4.999 AND INCHES MAXIMUM 5.000 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 4.705 AND INCHES MAXIMUM 4.716 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 19.250 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.156 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES NOMINAL 0.344 |
| ABRD | SECOND HOLE DIAMETER | INCHES NOMINAL 0.344 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 5.750 |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | INCHES NOMINAL 7.375 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.125 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | SHOULDER END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SHOULDER OUTSIDE DIAMETER MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | IN SHOULDER END DRILL THREE 0.344 INCH NOMINAL DIAMETER LONGITUDINAL HOLES,EQUALLY SPACED ON A 1.500 INCH NOMINAL DIAMETER CIRCLE CIRCUMSCRIBED AROUND AXIAL CENTER,FIRST HOLE 5.938 INCHES NOMINAL DEPTH INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE,TAP WITH 0.125 NATIONAL PIPE THREAD,SECOND HOLE 9.625 INCHES NOMINAL DEPTH INTERSECTING ADDITIONAL 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE EQUIDISTANT 3.688 INCH NOMINAL DISTANCE BETWEEN HOLES,TAP WITH 0.125 NATIONAL PIPE THREAD,THIRD HOLE 13.312 INCHES NOMINAL DEPTH INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE TAP WITH 0.125 NATIONAL PIPE THREAD; ALL THREE PERPENDICULAR HOLES 1.938 INCHES NOMINAL DEPTH; TWO SYMMETRICAL GROOVES PARALLEL TO SHOULDER END 1.125 INCHES FROM END,0.531 INCH NOMINAL WIDTH BY 1.000 INCHES NOMINAL DEPTH; KEYWAY 0.375 INCH NOMINAL WIDTH 0.250 INCH NOMINAL DEPTH 1.625 INCHES NOMINAL LENGTH WITH A FULL RADIUS CORNER |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| STYL | STYLE DESIGNATOR |