NSN 5905-00-517-9330 · NIIN 005179330 · FSC 5905
NO DASHES 5905005179330
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.218 AND INCHES MAXIMUM 1.282 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.330 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.080 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS SINGLE SECTION 0.0 TO 4.5 AND -25 DEG CELSIUS SINGLE SECTION 0.0 TO 2.5 AND 85 DEG CELSIUS SINGLE SECTION -1.5 TO 1.5 AND 125 DEG CELSIUS SINGLE SECTION -4.0 TO 4.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.400 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 8.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -250.0 TO 250.0 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.075 |
| AEDX | SHAFT STYLE | |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 1.000 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| FEAT | SPECIAL FEATURES | AIRCRAFT,F-111 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22097 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22097 TO 2 |
| AAQL | BODY STYLE | |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| AAPN | SECTION QUANTITY | 1 |
Supersedes
This item replaces cancelled NIINs 000433852 · 000693472 · 009122883. An older drawing citing one of those numbers resolves here.