NSN 3020-00-909-1260 · NIIN 009091260 · FSC 3020
NO DASHES 3020009091260
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.271 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.1140 |
| AAQL | BODY STYLE | |
| CWQD | PITCH ANGLE | DEGREES 34.8833 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.890 |
| AJLA | TEETH QUANTITY | 23 |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 0.730 |
| CWRX | BORE NOMINAL DEPTH | FIRST END INCHES 1.130 |
| ABSA | SPLINE QUANTITY | 12 |
| CBBL | FEATURES PROVIDED | SPIRAL |
| CQFM | HARDNESS RATING | BODY ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 63.0 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 1.535 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 0.985 |
| FEAT | SPECIAL FEATURES | HUB END IS THREADED,0.938-20 UNEF-3A,AND HAS TWO AXIAL SLOTS DIAMETRICALLY OPPOSITE FROM EACH OTHER |
| MATT | MATERIAL | OVERALL STEEL COMP 1031 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 60.0 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| BDTX | SPLINE PITCH DIAMETER | SECOND END INCHES NOMINAL 0.6000 |
| CWTR | HUB STYLE DESIGNATOR | |
| SFTT | SURFACE TREATMENT | OVERALL CHROMIUM AND OXIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST TREATMENT RESPONSE A-S 2406 AND ASSN STD 2ND TREATMENT RESPONSE A-S 2485 |
| STYL | STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.355 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.938 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.880 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| ANTP | BORE STYLE | |
| CWRB | BODY RECESS NOMINAL DEPTH | FIRST END INCHES 0.438 |