NSN 3010-00-994-8607 · NIIN 009948607 · FSC 3010
NO DASHES 3010009948607
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKPS | DUTY CYCLE | CONTINUOUS |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 0.706 |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| ABWV | SHAFT DIAMETER | FIRST END INCHES NOMINAL 0.248 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.125 |
| ANPZ | ENCLOSURE FEATURE | OPEN |
| AAJT | OVERALL HEIGHT | INCHES 2.750 |
| AAJU | OVERALL LENGTH | INCHES 4.750 |
| ACDC | CURRENT TYPE | INPUT AC |
| AGQL | UNDERCUT LENGTH | SINGLE END INCHES NOMINAL 0.031 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 0.500 |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.562 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 105.0 OR LINE TO NEUTRAL HIGH 125.0 |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS RUNNING 10.0 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| AAJV | OVERALL WIDTH | INCHES 2.781 |
| ABGH | STEP DIAMETER | SINGLE END INCHES NOMINAL 0.248 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A28 AND SECOND STYLE A12 |
| FAAZ | PHASE | INPUT SINGLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END ANGLED TO ARMATURE/ROTOR AXIS |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.063 |
| ABPA | UNDERCUT DIAMETER | SINGLE END INCHES NOMINAL 0.236 |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES NOMINAL 0.313 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.562 |
| CWDY | TEMP RATING | OPERATING CELSIUS 0.0 AND OPERATING CELSIUS 38.0 AND AMBIENT CELSIUS 50.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 2 |
Supersedes
This item replaces cancelled NIIN 011675890. An older drawing citing one of those numbers resolves here.