NSN 5920-00-198-4303 · NIIN 001984303 · FSC 5920
NO DASHES 5920001984303
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---19833, TYE GDI-30F |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES NOMINAL 1.190 |
| AGUU | BUSHING THREAD LENGTH | INCHES NOMINAL 0.440 |
| AGUV | CAP DIAMETER | INCHES NOMINAL 0.530 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| MATT | MATERIAL | BODY PLASTIC DIALLYL PHTHALATE AND GLASS |
| CQJL | CURRENT CARRYING RATING IN AMPS | 20.0 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUN | RESISTOR RATING | OHMS 22.0 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 5.0 TO 7.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 9 |
| ELEC | VOLTAGE IN VOLTS | 7.0 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.810 |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.310 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| AAQL | BODY STYLE | |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| AGVH | FLATTED SIDE BUSHING HOLE LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.575 |
Supersedes
This item replaces cancelled NIIN 001301953. An older drawing citing one of those numbers resolves here.