NSN 5306-00-807-1442 · NIIN 008071442 · FSC 5306
NO DASHES 5306008071442
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWF | FOURTH DIAMETER FROM HEAD | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.245 |
| AAWE | THIRD DIAMETER FROM HEAD | INCHES MINIMUM 0.372 AND INCHES MAXIMUM 0.373 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | MATT |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 4 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES MINIMUM 1.740 AND INCHES MAXIMUM 1.760 |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | INCHES MINIMUM 2.460 AND INCHES MAXIMUM 2.470 |
| AAWL | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER | INCHES MINIMUM 2.517 AND INCHES MAXIMUM 2.537 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.473 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.090 AND INCHES MAXIMUM 3.110 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.209 AND INCHES MAXIMUM 0.229 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.372 AND INCHES MAXIMUM 0.373 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.247 AND INCHES MAXIMUM 0.251 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.187 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.2797 TO 0.2824 |