NSN 3020-00-385-0588 · NIIN 003850588 · FSC 3020
NO DASHES 3020003850588
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.1880 |
| CBBL | FEATURES PROVIDED | SPIRAL |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 65.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 9.6250 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 9.6250 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 3.5427 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.6250 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | FIRST END INCHES 0.2180 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.6870 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.4995 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.5010 |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.5427 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 1.4370 |
| CWQD | PITCH ANGLE | DEGREES 67.7500 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 3.3430 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.4410 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 4.0000 |
| MATT | MATERIAL | OVERALL STEEL COMP 4820 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIINs 003532726 · 005671427. An older drawing citing one of those numbers resolves here.