NSN 3020-00-692-6084 · NIIN 006926084 · FSC 3020
NO DASHES 3020006926084
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.376 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.4000 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 57.0 AND ROCKWELL C MAXIMUM 65.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.900 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.245 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.000 |
| CWPP | PRESSURE ANGLE | DEGREES 18.6476 |
| CWPZ | HELIX ANGLE | DEGREES 22.0000 |
| CWNM | TOOTH DIRECTION | RIGHT |
| AJLA | TEETH QUANTITY | 22 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.500 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624,FS8620,FS8622,FS8625,FS8720,FS94B20 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.501 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.438 |
Supersedes
This item replaces cancelled NIIN 002158137. An older drawing citing one of those numbers resolves here.