NSN 3020-00-765-6808 · NIIN 007656808 · FSC 3020
NO DASHES 3020007656808
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 79.0 AND ROCKWELL C MAXIMUM 85.0 |
| STYL | STYLE DESIGNATOR | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.5312 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 17 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.2500 |
| AJLA | TEETH QUANTITY | 52 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.346 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.318 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.138 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.530 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.120 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.180 |
| ANTP | BORE STYLE |