NSN 5305-00-354-5147 · NIIN 003545147 · FSC 5305
NO DASHES 5305003545147
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: AIRCRAFT, EAGLE F-15; AIRCRAFT, HORNET F/A-18; ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D); AIRCRAFT, PHANTOM F-4; AIRCRAFT, HARRIER AV-8B
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, EAGLE F-15; AIRCRAFT, HORNET F/A-18; ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D); AIRCRAFT, PHANTOM F-4; AIRCRAFT, HARRIER AV-8B |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.766 AND INCHES MAXIMUM 0.796 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.395 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-455 |
Supersedes
This item replaces cancelled NIIN 002842033. An older drawing citing one of those numbers resolves here.