NSN 5305-00-115-6250 · NIIN 001156250 · FSC 5305
NO DASHES 5305001156250
In Stock
SCREW,EXTERNALLY RELIEVED BODY
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.110 AND INCHES MAXIMUM 3.140 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| SFTT | SURFACE TREATMENT | OVERALL CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE 135410027 FSC- 94990 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.735 AND INCHES MAXIMUM 0.795 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 90000 |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.178 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.250 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.410 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.202 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.172 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 2.345 AND INCHES MAXIMUM 2.375 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| MATT | MATERIAL | OVERALL STEEL COMP 1020 |
Supersedes
This item replaces cancelled NIIN 010279363. An older drawing citing one of those numbers resolves here.