NSN 5305-01-502-4868 · NIIN 015024868 · FSC 5305
NO DASHES 5305015024868
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F18 E/F
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.205 AND INCHES MAXIMUM 1.235 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3729 AND INCHES MAXIMUM 0.3813 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.1105 AND INCHES MAXIMUM 0.1125 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.1540 AND INCHES MAXIMUM 0.1560 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | THREADS INCHES NOMINAL 0.070 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | THREADS INCHES MINIMUM 1.114 AND INCHES MAXIMUM 1.134 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH; FINISH - ALUMINUM PER MIL-C-83488, TYPE II, CLASS III PULS CETYL ALCOHOL PER MIL-L-87132, TYPE 1, GRADE B; INTENDED FOR USE IN ALUMINUM STRUCTURE WHERE APPLIED SEALANT WOULD NOT BE SUITABLE |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AA-S 5662 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |