NSN 5305-01-670-1361 · NIIN 016701361 · FSC 5305
NO DASHES 5305016701361
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18E AND F AIRCRAFT
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES NOMINAL 0.5780 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.0005 AND INCHES MAXIMUM 1.0305 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.5504 AND INCHES MAXIMUM 0.5604 |
| FEAT | SPECIAL FEATURES | 125 KSI ULTIMATE SHEAR STRENGTH |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.312 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3750 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.077 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F/A-18E AND F AIRCRAFT |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-3-1170 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO(125 KSI SHEAR),INCONEL 718(125 KSI SHEAR),6AL-4V TITANIUM(95 KSI SHEAR) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S 5662 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.4275 AND INCHES MAXIMUM 0.4475 |