NSN 5306-01-536-4446 · NIIN 015364446 · FSC 5306
NO DASHES 5306015364446
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F/A-18 AIRCRAFT
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.330 AND INCHES MAXIMUM 0.360 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SUPP | SUPPLEMENTARY FEATURES | COTTER PIN HOLE 0.070 INCH DIA AT TIP OF BOLT 0.106 INCH FROM END |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG REDUCED HEAD,GEAR DRIVE RECESS,INCONEL 718 (125 KSI SHEAR),0.0156 INCH OVERSIZE |
| FEAT | SPECIAL FEATURES | INTERNAL DRIVE RECESS PER NAS 1800 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.265 AND INCHES MAXIMUM 0.272 |
| AGAV | END ITEM IDENTIFICATION | F/A-18 AIRCRAFT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.580 AND INCHES MAXIMUM 0.610 |
| AASK | HEAD STYLE | |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2021 AND INCHES MAXIMUM 0.2026 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.042 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-L-87132,TY 1,GR B |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |