NSN 5315-01-237-6961 · NIIN 012376961 · FSC 5315
NO DASHES 5315012376961
In Stock
PIN,STRAIGHT,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| AAZP | CHAMFER LENGTH | INCHES NOMINAL 0.046 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.124 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 2.022 AND INCHES MAXIMUM 2.042 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 1.090 |
| CQPJ | PIN CHAMFER ANGLE | DEGREES MINIMUM 14.5 AND DEGREES MAXIMUM 15.5 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| HGTH | HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.062 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5735 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 012319401. An older drawing citing one of those numbers resolves here.