NSN 6105-00-139-5056 · NIIN 001395056 · FSC 6105
NO DASHES 6105001395056
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 5.500 |
| AAJU | OVERALL LENGTH | INCHES 8.891 |
| AAJV | OVERALL WIDTH | INCHES 5.500 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.500 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 3.500 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.047 |
| AKCT | SHAFT ROTATION DIRECTION | IDENTICAL ENDS CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AXGY | MOUNTING METHOD | RESILIENT CRADLE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 48 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.166 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | IDENTICAL ENDS INCHES 4.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 3.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 2.750 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1050.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.250 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 5.800 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | IDENTICAL ENDS SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |