NSN 5320-01-091-8600 · NIIN 010918600 · FSC 5320
NO DASHES 5320010918600
In Stock
PIN-RIVET
Rivets
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.121 AND INCHES MAXIMUM 1.146 |
| AASK | HEAD STYLE | |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3403 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MAXIMUM 0.508 |
| AAZU | TIP DIAMETER | INCHES NOMINAL 0.3280 |
| ABAJ | LUBRICATION | DRY FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.755 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | 8-32UNJC-3B THREAD SIZE,0.280 IN. LENGTH ALONG THE LONGITUDINAL AXIS FROM THE HEAD END,0.120 IN. SLOT LENGTH,0.060 IN. SLOT WIDTH LOCATED 0.220 IN. FROM TOP OF HEAD TO CENTER OF SLOT |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |